This belt is made from approx 3.5 - 4mm thick heavyweight full grain plain or worn look buffalo leather (80% vegetable tanned and 20% chrome tanned). Due to the nature of the worn, distressed look leather the pattern on the one you received will be slightly different to that shown.
Measuring approx 1 1/2 inches (38mm) wide, fitted with a slider style brushed gunmetal steel grip buckle and comes with a loose leather keeper loop.
This buckle fastens slightly differently to pronged buckles. See picture about fastening but a latch on the top of the buckle lifts up so you can thread the strap through the buckle and then close the latch and it will grip the leather.
Due to it not having buckle holes the sizing works the same but I make these so they are 6 inches from the size to the end tip to give enough strap to fit through the buckle, so a 32 inch belt will be 32 inches from where it fits the buckle to where it would normally be with a pronged strap and then 6 inches to the end tip so 38 inches in total length.
I finish the plain straps with a crease running along the edges, if you don't want this crease please let me know after purchase. I don't normally put he crease on the worn look straps but I can if you want, again just let me know after purchase.
This leather comes in slightly smaller pieces the other leather I stock so if you would like a belt longer than 44 inches please message me before purchase and I will see if I can make one with the leather I have at the time. If you want one shorter than 32 inches please buy any size as normal and again please message me afterwards to let me know the size you want.
As these belts are handmade by myself if you want any extra holes or such just let me know after purchase or if you have any special requests or questions please feel free to message me.
Choosing your belt size:
All my belts are measured from the fold in leather at the buckle end to the middle of the six buckle holes and not the end tip.
Measure your actual waist and add 2 inches to allow for clothing worn underneath, or the best way, measure your current belt from the fold in leather at the buckle end to the buckle hole you use the most and feel comfortable with.
Please don't use trouser sizes as they can stretch and shrink over time, especially jeans.