These belts do not come with a buckle, they are for you to add your own.
This belt is made from approx 2.4-2.6mm thick leather cut from whole butt splits often shortened to leather splits and is a classic cut of the hide for basic belts.
Available in a choice of 6 widths, 3 colours of press studs (nickel plated steel, brass or black bronzed) and either a leather, nickel plated steel or brass keeper loop but I can't get the loops in black metal.
I usually make these belts with a prong slot so you can add a single pronged buckle but if you don't want this slot or need two slots please let me know after purchase.
The 1 1/4, 1 1/2 and 2 inch wide belts are finished with a crease running along the edges, if you don't want this crease again please let me know after purchase. I don't normally run the crease along the 3/4 and 1 inch wide belts.
Depending on the leather I have at the time I can sometimes make up to 52/54 inch belts. If you would like a belt longer than 48 inches please message me before purchase to see fi I can make one long enough with the leather I have at the time. If you would like a belt shorter than 32 inches please buy any size as normal and put the size you want in the message box.
Choosing your belt size:
All my belts are measured from the fold in leather at the buckle end to the middle of the six buckle holes and not the end tip.
Measure your actual waist and add 2 inches to allow for clothing worn underneath, or the best way, measure your current belt from the fold in leather at the buckle end to the buckle hole you use the most and feel comfortable with.
Please don't use trouser sizes as they can stretch and shrink over time, especially jeans.